PEI (0.125mm thick) pasted on one side.
3Dmax-PEI is the most simple and convenient 3d printer surface.
NEVER MEET STICK PROBLEM.
GET FIRST LAYER EASILY EVEN FOR A NEW USER.
No need put 2~4 layers on the heatbed, multy laters will definitely make a not good difference on the heat transfer and will increase the heating time.
The totally thickness of 3Dmax-PEI is only 0.52mm. and only 1 layer
After apply the PEI sheet on our special spring stainless steel sheet, You can simply use 4 clips or magnets to hold it on the heatbed, then enjoy the printing.
Easily remove 3D prints on printer by removing the spring steel plate, flexing it, and popping the print off. It's simple and makes the print removal process much easier.
How to Use 3Dmax-PEI
If your 3D print bed has a PEI sheet, carefully use the scraper to remove the PEI sheet starting from one corner of the print bed. Then, pull off the entire PEI sheet. Next, hand-rub or use Goo Gone to remove any excess adhesive before applying on the flex plate magnetic base. Finally, place the spring-steel plate on top of the flex plate magnetic base. You are now ready to begin printing!
Contact: Mozart Jiang
Add: Room 8103, Jinmaoyuan Building, Jinniu Western Road, Pingshan District, Shenzhen, China 518118